Our Dandong Foundry could produce elevator cast iron wheels. The followings are the main technical requirements for the production of cast iron wheels used on elevators.

1. Material Requirements: Cast iron wheels should be made of high-strength cast iron materials with good wear resistance and fatigue resistance.

2. Dimensional Accuracy: The diameter, thickness, aperture and other dimensions of the cast iron wheel should meet the design requirements to ensure accurate matching with other components.

3. Surface Quality: The surface of the cast iron wheel should be flat and smooth, without defects such as sand holes, pores, cracks, etc.

4. Mechanical Properties: The cast iron wheel should have sufficient strength and rigidity to withstand the load and impact during the operation of the elevator.

5. Wear Resistance: The surface of the cast iron wheel should have good wear resistance to extend the service life.

6. Lubrication Requirements: The bearing parts of the cast iron wheel should be designed with a reasonable lubrication system to ensure good lubrication effect.

7. Noise Control: The cast iron wheel should generate low noise during operation and not affect the use environment of the elevator.

8. Safety Performance: The cast iron wheel should comply with relevant safety standards and regulations to ensure the safety of the elevator operation.

This article is from our Dandong Foundry's Technical Requirements for Elevator Cast Iron Wheels

HOME PAGE | CASTING BLOG | CONTACT US